SLAB INJECTOR DESCRIPTION: Most Economical Sub Slab Injector on the market!
Our Injector features a “plugged” tip (we remove the tip and modify the wand) so your mixture will only come out via the two holes located an inch below the tip.
Designed for sub-slab treatments, it works just like any other pump sprayer but instead of spraying “away” from you, it will spray sideways 2+ feet in both directions.
You’ll need 1/2″ holes to treat so if you don’t have a HAMMER DRILL, check out our model. Very economical, comes with an 8″ drill bit and is strong enough to drill through concrete slabs, foundation walls, pool decking, flagstone, etc.
The following “short video” (less than 60 seconds long) shows why treating under cement slabs is important and how our slab injector works.
WHERE TO INJECT: Designed to treat patio slabs, pool decks, driveways, stoops, wall voids, hollow block foundation walls, retainer walls and more. When dealing with certain pests like SPRINGTAILS, MILLIPEDES, ANTS, CENTIPEDES, TERMITES, EARWIGS, SOWBUGS and other soil dwellers, sub slab injecting could be needed to get them where they’re nesting.
$25.00 (287467)
Order online and save 5%
Laura says
Do the holes drilled not affect the foundation or the slabs integrity? I’m just concerned about allowing even more insects access under there as well as any inspection issues later on if I sell my house.
Tech Support says
Laura,
So first, the holes will not impact the integrity of the cement whether you drill through hollow block or solid concrete. This is true for both slabs you walk on and foundation walls.
.
As for letting in more insects following the holes being drilled; that won’t happen since you will be treating on the other side and those applications will remain active for years. Second, the holes can be “capped” with our 1/2″ corks and if you push them down an inch, you can cap them with cement so there won’t be any holes visible or usable.
.
Technical Support
bugspray.com