PRODUCT DESCRIPTION: Targeting most any shrub, vine or even trees, Brush Killer’s active should be applied to target plants foliage (leaves) coating them on both sides. To help get uniform coverage, add 1 oz of BOOST to your tank mix.
Treated plants should show die off in 7 days; repeat your treatment in 14 days at the higher rate if your first application did not kill off sprayed vegetation.
One month after your first or second application (if two treatments were done, wait 30 days from the second treatment), cut away all limbs as far down as possible to the main trunk. If you plan on removing the trunk in the near future OR want to insure it’s dead for good, spray 1/2 to 1 gallon of mixed solution on the top of the freshly cut stump repeatedly to allow the mixture to soak in. Do this until the required amounts of mixture are absorbed (required amounts below).
RATE OF APPLICATION: 4 oz per gallon; 1 gallon treats 250-500 sq/ft. If you find continued growth 7 days after your first application OR if treated vegetation is not wilting away, treat again using 8 oz per gallon. To kill stumps, mix 8 oz per gallon.
1/2 gallon of mixed solution will be adequate for stumps 12″ or less; use 1 gallon for stumps 15″-30″.
RELATED PRODUCTS: BOOST ADJUVANT PUMP SPRAYER
$15.00 (901111) pint
Order online and save 5%
$25.00 (901113) quart
Order online and save 5%
Supporting Video
Leave a Reply