PRODUCT DESCRIPTION: X-Jectors are designed to be “tapped” into sheetrock, paneling or other wall covering so you can treat the empty space with products like XEMPT DUST or FS MP AEROSOL. They’re very strong, similar to “ribbed plastic wall anchors”, and allow you to safely apply pesticides to hidden voids and then “cap” the hole to keep the pesticide inside.
These measure 1.5″ long, have two “barbs” that hold them in place so once in the wall, they won’t come out. They require a 3/8″ pilot hole so you can “press” them in (or lightly tap with a hammer) to secure them.
The inside is hollow by design so you can treat “into” the void with a dust or aerosol.
They feature a “cap” so you can seal them after treatments to keep the pesticide inside the wall void where it can do its job safely and securely. The picture below shows one being held and one “in a wall” with the cap pressed on securely.
To treat with an aerosol, remove the cap and use a “straw” to direct the product into the Xjector.
You can also dust into the Xjector. Xempt Dust comes with a “tip” that will fit into the Xjector but if you have our CRUSADER , be sure to remove the black rubber tip so the metal extension can fit nice and tight into the Xjector.
WHERE TO USE THEM: Any wall, ceiling or other “covering” with a hollow space behind it. They’re also great for the bottom of cabinets that have a “false floor”.
$12.00 (10 pack) (3+ $10.00 ea)(28139610PACK)(FREE STANDARD SHIPPING)
Order online and save 5%
TAGS: pest-x jector, wall void treatments, inject pesticide, how to treat walls, wall injector, wall void port, dust attic
Leave a Reply